19
After selecting the numerical value, short press the function setting key
, so as to confirm
the OPU setting. At this moment, the numerical value on the right side of the word “OPU” is
always lit up without blinking.
Exit the setting interface, and return back to the main interface by short pressing the function
setting key
.
4.2.2.2 Output frequency settings (OPF)
Output frequency setting interface
Enter the setting interface by short pressing the function setting key
. Select the function
setting contents by short pressing the left key
or the right key
for 0.5s.
Enter the OPF setting interface by short pressing the function setting key
. At this moment,
the word “OPF” is always lit up, and“50Hz” or “60Hz” showing up on the right side of the word
“OPF” blinks at the same time. Select “50Hz” or “60Hz”by short pressing the left key
or the
right key
. OPF is 50Hz by default.
After selecting “50Hz” or “60Hz”, short press the function setting key
, so as to accomplish
the OPF setting. At this moment, the “50Hz” or “60Hz” on the right side of the word “OPF” is
always lit up without blinking.
Exit the setting interface, and return back to the main interface by short pressing the function
setting key
.
4.2.2.3 Physical address settings (ID)
Physical address setting interface
Enter the setting interface by short pressing the function setting key
. Select the physical
address setting interface by short pressing the left key
or the right key
.
Summary of Contents for 6KVA
Page 1: ......
