29
Battery mode
5.3 Bypass mode
If UPS remains shutdown status after being electrified, and suffers from inverter fault in the inverter
power supply mode, or is turned off, UPS will switch to bypass mode.
Bypass mode (the inverter has been shut down)
Caution:
When UPS is in bypass mode, if voltage and frequency fluctuation occur, or UPS
suffers from power failure, the loads will not be under the protection of UPS.
5.4 Maintenance mode
When it is necessary to conduct routine maintenance to the UPS, users can switch the loads to the
maintenance bypass mode through maintenance bypass switch, and the load power supply is
uninterruptible. The maintenance bypass switch is inside the UPS single unit. The capacity meets
the requirements for the total load capacity of the single unit.
Summary of Contents for 6KVA
Page 1: ......