13
5.2 Display interface
Display
Function
Icon display
Load icon: The approximate load capacity percentage (0-25%, 26-50%,
51-75% and 76-100%) is indicated by the number of load bar sections
illuminated. When UPS is overloaded, the load icon will flash.
Mute icon: Indicates the audible alarm is disabled / mute.
Press the mute key in the battery mode, the mute icon flash.
Fan icon: Indicates fan working status. When the fan normally runs, the icon
displays rotation; if the fan is not connected or faulty, the icon will flash.
Fault icon: Indicates UPS is in fault mode.
Battery status icon: Indicates the battery capacity of 0-25%, 26-50%,
51-75%, and 76-100%. When the capacity of battery get low or battery
disconnected, the battery status icon will flash.
UPS status information
In non-setting mode, it displays UPS output information when UPS
normally runs; Fault code will be told in fault mode.
In setting mode, users could adjust different output voltage, activate ECO
mode, activate CUCF mode, select an ID number and so on by operating
function setting keys and inquiring key.
Operation mode
Indicates the power capacity of UPS within 20 seconds after starting up.
Indicates UPS operation mode in 20 seconds, such as STDBY (standby
mode), BYPASS (Bypass mode), LINE (AC mode), BAT (Battery mode),
BATT (Battery Self Test mode), ECO (Economic mode), SHUTDN
(Shutdown mode), CUCF (Constant Voltage and Constant Frequency
mode).
Icon display
UPS status information
Operation mode
Summary of Contents for EA900Pro Series
Page 1: ......