11
3.1.4 Installation Tools
DANGER
To ensure safety, installation tools for live operation shall be insulated.
Installation tools which may be used in installation process are shown in Table 3-2
and used as needed.
Table 3-2 Installation tools
Tool name
Main function
Tool name
Main function
Forklift
Handling
Nail hammer
Knock, install and remove
components
Herringbone
ladder
High-place operation
Rubber hammer
Knock
and
install
components
Clip-on ammeter
Detect current
Percussion drill, drill bit Drill
Multimeter
Check electrical connection
and electrical parameters
Insulating tape
Electrical insulation
Cross screwdriver Fasten screw
Heat-shrinkable tubing Electrical insulation
Leveling
instrument
Leveling
Heat gun
Heat heat-shrinkable tubing
Insulated monkey
wrench
Tighten and loosen bolts
Electrician's knife
Wire stripping
Insulated
torque
wrench
Tighten and loosen bolts
Cable tie
Bundle
Crimping pliers
Cc cold-pressed terminal
Leather working gloves Protect operator’s hands
Hydraulic clamp
Clamp OT terminal
Antistatic gloves
Anti-static
Diagonal pliers
Shear cables
Insulating gloves
Insulation
Wire stripper
Wire stripping
Insulated
protective
shoes
Protect operator
3.2 Unpacking and Inspection
3.2.1 Unpacking of the Cabinet
The steps to unpack the cabinet are as follows
:
1. Check if any damages to the packing. (If any, contact to the carrier)
2. Unpack the package.
3. Remove the protective foam around the cabinet.
4. Check the UPS.
(a) Visually examine if there are any damages to UPS during transportation. If any,
contact to the carrier.
(b) Check the UPS with the list of the goods. If any items are not included in the
list, contact to our company or the local office.
Attention
Be careful while removing to avoid scratching the equipment.
Summary of Contents for EA990RT G5 10
Page 4: ......