4.
Attach the transmission shafts (2),
the long lever (4) and short lever (3)
to the
leg (8)
using the long screw
(
12
) as shown in Fig. 5.
Use the
screwdriver (17) to help you. The
screw should be tightly attached to
the shaft but still allows the leg and
the levers to rotate freely.
Note that
the long lever should be in between
the transmission shaft and the short
lever.
Repeat by using another leg
.
5.
Add a leg (8) to the short and long
lever
using the short
screws (13
), as
shown in Fig. 6.
Repeat to assemble
the other set of legs
.
6.
Attach another short lever (3) to the
middle leg using a short screw, as
shown in Fig. 7. Repeat for the other
side.
7.
Install the legs assembled in the
previous step to the chassis (1) using
the long screws (
12
)
and screwdriver
as shown in Fig. 8.
Make sure the
screws are firmly secured to the
chassis but still allow the legs to
move freely.
Fig. 5
Fig. 6
Fig. 7
8
4
3
