9
OPERATION
.
Press
“
/
”button on the remote control to
select 4:3 pan scan/16:9.
2).Adjust
Press
“
/
”button on the remote control to
select Brightness/Contrast/Hue/Saturation/
Sharpness.
In every item using
“
/
”button to adjust
and press
ENTER/SETUP
button to exit.
Default SETTINGS
When selecting default function. Press
ENTER/SETUP
button to reset to default.
RESET FUNCTION
Press and hold
button
for 6 seconds to
active the RESET function. Also in setup menu
when you select the Default item and press
ENTER/SETUP
button. It will active the reset
function. The
RESET
function is to be
activated for the following reasons:
Initial installation of the unit when all wiring is
completed.
OPERATION Error symbol on the display.
Once the reset button is pressed. All the
memory’s information will be lost!
SLIGHTFOG AFTER
OPERATION
Normal in colder weather. Allow radio to run for
1-2 hours, This will burn off moisture.
RADIO OPERATION
1. SWITCHING TO THE RADIO MODE
Press
MODE
button or in the main menu to
select RADIO mode. The following information
will appear on the display
2.
SELECTING THE FREQUENCY BAND
Shortly press
BAND
button to select desired
band. The reception band will change in the
following order:
FM1
FM2
FM3
You can select Europe or American Band in
Radio Area item of the SETUP menu.
3. Selecting Frequency
During radio mode. Shortly press
/
button will activate automatic seek function. It
will search up/down a station automatically.
Press and hold
/
button for 2 seconds
till
“MANUAL” appear on the display. The
manual tuning mode is selected. In this mode
you can turn up/down a step frequency one
by one till searched a station. If both buttons
have not been pressed for 5 seconds, it will
return to seek tuning mode and “
AUTO
”
appears on the display.
Summary of Contents for M3-TFT DAB+
Page 1: ...OWNER S MANUAL M3 TFT DAB...
Page 4: ...4 INSTALLATION...
Page 5: ...5 WIRING CONNECTION ISO CONNECTION...
Page 16: ...16 REMOTE CONTROL...
