14
Form E-551
4.
Slide filter cartridge from the filter housing.
5.
Shake the cartridge over an open garbage can.
6.
Using clean dry compressed air blow out filter until clean.
7.
Replace with new filter if required based on inspection.
Replacing the Vacuum Filter
1.
Install a new filter.
2.
Using vacuum cleaner remove all debris found inside the filter chamber.
3.
Return the cleaned filter cartridge and cover the filter housing.
4.
Inspect the seal found on the filter box cover for any damage and repair as required.
5.
Carefully return the filter box cover plate to the machine and secure it using the mounting screws.
6.
Cover the cutting surface with polythene plastic and start the vacuum pump. Check the vacuum level in
the software and inspect for any audible leaks. Repair any leaks found.
