2
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
To order parts and supplies: 800.345.1178 >> eastwood.com
7
READ INSTRUCTIONS!
Thoroughly read and understand this instruction manual before using this Benchtop Band Saw. Save for future reference.
SAFETY INFORMATION
OPERATIONAL HAZARDS!
•
Always use the Clamp to hold the material in place.
•
Inspect tool before each use for loose or broken components. Do not use tool if any components are damaged.
•
Turn saw off and Unplug when not in use to avoid accidental starts!
•
Do not force the machine when cutting material. Excessive force applied to the saw can cause the blade to break!
HEALTH HAZARDS!
•
While operating wear ANSI approved eye protection.
•
This tool can emit excessive noise while operating. Wear hearing protection while in use.
•
Fine dust can be created by the cutting process. Wear NIOSH approved respiratory protection while using.
INJURY HAZARDS!
•
Moving parts can be dangerous! Do not wear loose clothing, jewelry, etc. & tie back long hair. Do not put fingers near moving parts!
•
Metal may have sharp edges before and after cutting, handle with gloves and avoid sharp edges.
SPECIFICATIONS
•
Motor Power:
1000 Watts
•
Motor Voltage:
120 V AC
•
Throat Capacity:
3.25" (85mm)
•
Width Capacity:
4.5" (115mm)
•
Blade Speed:
100 – 260 ft/min (30 – 80 m/min)
•
Capacity:
– Circular (90°)
– 3.3" (85mm)
– Rectangular (90°)
– 3.3 x 4.1" (85 x 105mm)
– Circular (45°)
– 2.7” (70mm)
– Rectangular (45°)
– 2.5 x 2.9" (65 x 75mm)
TROUBLESHOOTING
• Blade comes off:
- Adjust Tension. See section on “Adjusting the Blade Tension”.
• Does not cut or slow cutting:
- Replace Blade. See section on “Replacing the Blade”.
ADDITIONAL AVAILABLE ITEMS
• #20238
Replacement Blade
