2
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
The
EASTWOOD 30” 3-IN-1 SHEAR, BRAKE AND SLIP ROLL
are three precision engineered metal working tools all rolled into one. It is designed to shear and
produce accurate bends and shapes in mild, 20 gauge sheet steel and 18 gauge aluminum in widths up to 30”. Create complex shapes such channels, ribs,
patch panels, cones, cylinders and much more in sheetmetal, wire and tubing, all with one convenient bench mount tool.
TOOLS REQUIRED
(Not included)
• 5mm Hex Key
• 6mm Hex Key
• 8mm Hex Key
• 10mm Hex Key
• 16mm Wrench
• 18mm Wrench
• Feeler Gauge set
• Angle Gauge or Protractor
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product: