6
Eastwood Technical Assistance: 800.544.5118 >> techelp@eastwood.com
ASSEMBLY
PLATEN TABLE [B] TO
SANDER HOUSING [A]
• Attach the Platen Table
[B]
to the
Sander Housing with the Indexable
Platen Table Clamps
[C]
(Fig 1)
.
• Start threads, pull handle back against
spring pressure and use the 3mm
Hex Key
[D]
to tighten
(FIG 1)
.
INSTALL GUIDE PINS [E] TO
SANDER HOUSING [A]
• Locate the Guide Pins
[E]
in the slots
of the Platen Table Angle Brackets
and thread into place
(Fig 2)
.
INSTALL PLUNGER BRAKE [F] TO
SANDER HOUSING [A]
• Locate the Plunger Brake
[F]
in the
recess at the top of Housing casting
and thread into place with 2 Phillips
Head Screws
[G]
(Fig 3)
.
FIG. 1
Push
Out
✓
FIG. 2
FIG. 3