2
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
The
EASTWOOD WORK BENCH
features a spacious 61” x 30” work surface with a 2” retaining fence on three sides. The heavy, all steel construction supports up
to a total loaded weight of 1600 lbs. [725kg.] with a fully open frame to allow for under bench storage or placement of welders, compressors and other equipment.
CONTENTS
Box 2 Includes:
(2)
Rear Legs -
[A]
(Identified by 8 slotted holes and 2 notches)
(1)
Left Front Leg -
[B]
(Identified by 4 slotted holes and 1 notch on left side)
(1)
Right Front Leg -
[C]
(Identified by 4 slotted holes and 1 notch on right side)
Box 1 Includes:
(4)
Foot Plates -
[D]
(1)
Long, Rear Brace -
[E]
(2)
Short, Side Braces -
[F]
(1)
Top -
[G]
NOTE:
The Rear edge of the Top is identified by
3 Thread Inserts while the Front edge has none
(1)
Long, Rear Fence -
[H]
(2)
Short, Side Fences -
[J]
(1)
5mm Hex Key -
[L]
Included Hardware:
(4)
M12 x 75 Bolts
(12)
M12 Nuts
(8)
M12 Washers
(48)
M8 Socket Head Bolts
(32)
M8 Self-Lock Nuts
TOOLS REQUIRED
• Two 19mm wrenches
• One 12mm wrench
• Level
This Workbench is shipped in 2 boxes. The components contained in each are listed below.
Box 2
Box 1
A
A
B
C
G
D
H
J
J
F
F
E
✓
L
