background image

 

DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.

 

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

 

CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

 

NOTICE is used to address practices not related to personal injury.

 

 READ INSTRUCTIONS 

•  Thoroughly read and understand this manual before using. 
•  Save for future reference.

 

FALL HAZARD!

•  Awkward, out of balance body positions may be attempted while trying to reach specific areas of objects placed on the Work Bench 

during use. Failure to ensure proper footing can quickly result in a fall which could inflict serious personal injury or property damage. 

•  This Work Bench is intended for use in a shop environment only.
 

DO NOT

 concentrate a heavy load to any corner or edge of the Work Bench. This can cause the balance to shift suddenly, tipping the 

Work Bench forward which can quickly cause severe injury! 

 

DO NOT

 exceed the rated 1600 lbs. [725 kg.] weight capacity.

 

DO NOT

 use as a seat. 

 

DO NOT

 stand on the Work Bench.

 

•  The Eastwood Work Bench consists of moderately heavy metal components which can cause potentially serious injuries if allowed to 

drop. Avoid pinching hands while handling parts during assembly. Obtaining the assistance of a helper during assembly is necessary. 
The use of safety shoes is advised.

SAFETY INFORMATION

The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:

To order parts and supplies: 800.343.9353  >>  eastwood.com 

3

Summary of Contents for 31654









Reviews: