4
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
ASSEMBLY
FOOT TO LEG ASSEMBLY
• Place one of the M12 x 75mm Bolts through a Foot Plate
[D]
with the head in the recess then thread on an M12 Nut and
tighten securely using two 19mm wrenches (not included)
(FIG 1)
.
• Thread another M12 Nut 2-1/4” onto the M12 thread of each
Foot assembly and add an M12 Washer.
• Insert the threaded stem of the assembled Foot through
the hole in the triangular plate at the bottom of the Leg
[A]
,
[B]
&
[C]
.
• Add another M12 Washer then thread on an M12 Nut
(FIG 2)
. Tighten firmly but allow for final leveling
adjustment after complete assembly.
• Repeat for remaining three sets.
FIG. 1
FIG. 2
FIG. 3
D
✓
D
✓
A, B & C
✓
D
✓
A & A
✓
E
✓
