12
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
BRUSH REPLACEMENT
If motor performance is noticeably degraded
or fails to start as trigger is depressed, the
Motor Brushes are likely worn and need to be
replaced. To do so:
• First unplug machine.
• Remove the Motor Vent Panels (one each
side) by removing the screws with a
Phillips screwdriver
(FIGS 8 & 9)
.
• Remove the Motor End Housing by
removing two additional Phillips screws
adjacent to the Speed Control Wheel
(FIGS 10 & 11)
.
FIG. 8
FIG. 9
FIG. 10
FIG. 11