To order parts and supplies: 800.343.9353 >> eastwood.com
7
ASSEMBLY
• Unbox the Hub and Jackscrew Assembly
[F]
and three Jackscrew Handles
[G]
.
Assemble the jackscrew by threading the handles into the hub
(FIG 7)
.
• Apply a good quality, medium bodied chassis grease to the Jackscrew threads for
smoothest operation.
• Thread the Jackscrew into the bottom of the Frame until it begins to engage the
bottom of the Anvil Tube
(FIG 8)
.
• Install the Anvil Rack
[M]
to the left side of the English Wheel using the hardware
pre-installed on the Anvil Rack
(FIG 9)
.
• Unbox the additional Anvils and stow them on the Anvil Rack
(FIG 9)
.
FIG. 7
FIG. 7
FIG. 8
FIG. 8
FIG. 9
FIG. 9
