background image

WARRANTY TERMS

24

User manual TakeOff

Terms and conditions 

Easy Caravanning provides a two-year general 
warranty for the chassis, the body, furniture, 
the electrical system, with the exception of 
equipment from the various suppliers. To 
those, the warranty provisions of the relevant 
manufacturer apply. This warranty term of a 
maximum of 2 years will only be granted if: 
•  The TakeOff, with effect as from the date 

of delivery (effective delivery date or 
delivery in conformity with the invoice 
date and as stated on the warranty 
certificate) has undergone the inspection 
prescribed by Easy Caravanning every 
12 months at a certified dealer or service 
partner. 

•  The vouchers associated with the 

inspections referred to above have 
been received by Easy Caravanning 
B.V., filled out completely and stamped 
by the dealer, within 30 days after the 
inspections were conducted.

If one or more of the conditions above are not 
met, the warranty will lapse. For modifications 
or additions we always refer to the latest 
warranty terms on www.easycaravanning.com. 

Additional conditions

To the warranty above, the following additional 
conditions are applicable: 
•  During the warranty term, defects as a 

result of material and construction errors 
covered by this warranty will be restored 
free of charges after approval of Easy 
Caravanning B.V. Replaced materials, 
parts, or accessories remain the property 
of the manufacturer.

•  Transport to and storage at the service 

partner or Easy Caravanning B.V. occurs at 
the expense and risk of the customer.

The warranty will not be applicable if: 
•  The defects or faults with all resulting 

consequences were caused by normal 
wear (such as brake linings, couplings, 
and tires), external power failures/ 
overvoltage, inexpert use, accidents, 
abnormal weather conditions, neglect or 
poor treatment and/or overburdening.

•  It regards calibration activities, cleaning, 

balancing of wheels and other normal 
activities.

•  It regards the normal deterioration of the 

plastic components, minor flaws on the 
surface, as well as normal wear of the 
upholstery, rebounding gravel or other 
outside causes, such as air pollution or 
contact with abrasive substances, surface 
deviations due to poor maintenance, 
lamps, lamp covers.

•  After delivery changes were applied 

to the construction or the setup of the 
TakeOff, the gas pressure control was 
altered, damaged, or replaced.

•  Changes were made to gas, water and 

electricity conduits.

•  Or in case changes were made to the 

identification numbers applied by the 
manufacturer.

Warranty terms

Summary of Contents for TakeOff Active





































Reviews: