7
7. Adjust pressure.
To iNcReASe pressure - Turn Knob cLocKWiSe
To DecReASe pressure - Turn Knob coUNTeRcLocKWiSe
8. Begin procedure.
9. When procedure is complete, press the on/off Switch to
the “oFF” position.
cLEANiNg/MAiNtENANcE
WARNiNg
Turn the easy comp compressor off and disconnect
from any external power source before cleaning.
do Not
attempt to repair. There are no user
serviceable parts inside.
•
•
to clean the filter (weekly):
1. Unplug compressor.
2. Pry off filter end cap to check air filter for dust buildup.
3. if dust buildup occurs, remove air filter and wash in
warm, soapy water and rinse.
4. Absorb excess water from filter with a dry towel.
5. Return filter and end cap.
cleaning for Exterior components:
Use a clean cloth or sponge dampened with soap and
water. Wipe dry with a clean cloth or paper towel.
cAUtioN
excessive dust buildup on filter will reduce performance of
compressor. if this occurs, clean or replace with a new filter.
the air filter does not filter out saline.
Treatments
using nebulized saline will draw the saline mist back into
the compressor. Saline cause rapid deterioration of the
compressor seals and will void the warranty.
•
•
