STEP
10
Assemble and Install Left Wall Door
10
.
1
Build the door frame using 3/4" x 3 1/2" pressure-treated lumber and secure with 5" wood screws.
You will need two boards cut to 4'-9" that will be the vertical girts, two boards cut to 2'-1 1/2" that will
be the horizontal girts, and one board cut to 4'-11 3/4" that will be cross brace.
10
.2
Prepare the 5/8" plywood sheet with dimensions 2'-1 1/2" x 5'-4" for the door according to the
drawing.
10
.3
Use 3/4" x 2 1/2" pressure-treated lumber for the door trim and fasten with 2" wood screws.
You will need two boards cut to 2'-1 1/2" and two boards cut to 4'-11".
10
.4
Using 1/4" x 3/4" pressure-treated lumber, cut and install a starter course 1'-8 1/2" long
.
10
.
5
For the exterior siding on the door, use 1/2" x 6" wood siding boards and the illustration below as a
reference.
10
.6
Assemble siding shields with 2" galvanized nails.
10
.7
Install two 3" door hinges using 6x1" wood screws. Finish the doors installation by attaching 6"
door pull (see nodes
F, G
).
G
( 1 : 8 )
F
( 1 : 8 )
Summary of Contents for 5x6 Chicken Coop Plan
Page 1: ...5 x6 Chicken Coop Plan...
