EasyTravel Elite – ET1E
– Service Manual
Rev. 0404
31
3.23 Folding Lock Pin Kit
Kit Number E0-00-1-065
Tools:
Circlip pliers
1. Remove the old Pull Ring (25-F), Circlip
(25-E) and Washer (25-D). Extract the
old Spring (25-A) and old Pin (25-C)
from the Pin Housing (25-B)
2. Insert new Spring (25-A) and Pin (25-C)
into Pin Housing (25-B)
3. Apply pressure to the end of the Pin so
that it projects through the Pin Housing,
place Washer (25-D) and fit Circlip (25-
E) into its groove at the end of the Pin
4. Insert the Pull Ring (25-F) into the hole
in the end of the Pin
5. Test the assembly to ensure that the Pin
returns to its original position after pull-
ing on the Pull Ring
Figure 25
