34
Declaration of Conformity
in accordance with the EC Machinery Directive 2006/42 /
EC, Appendix II, Part 1A
Schartec
a trademark from bau-shop-24 GmbH
Fritz-Müller-Strasse 115
73730 Esslingen, Germany
hereby declares that the door operators
Easy 600 / Easy 800
were developed, constructed, and produced in agreement with the
− Machinery Guidelines 2006/42/EG
− Low-
Voltage Directive 2014/35/EU
− Directive for Electromagnetic Compliance 2
014/30/EU
− RoHS Guideline 20
11/65/EU
The following standards were used:
− EN 60335-1, where applicable
(Safety of elec. devices/openers for doors)
− EN 61000-6-3
(Electromagnetic compatability)
− EN 61000-6-2
(Electromagnetic compatability)
− EN 12453:2000 Paragraph 5.2
(Usage safety of power-operated doors)
− EN 60335-1:2012
(Safety of electronic devices)
− EN 60335-2-95:2015
(Safety of electronic devices)
− EN ISO 13849-1:2008
(Safety of machine controls)
The following requirements of the Machniery Guideline 2006/42/EG were adhered to:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.6, 1.3.2, 1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.14,
1.6.1, 1.6.2, 1.6.3, 1.7.1, 1.7.3, 1.7.4
The corresponding technical documents will be transmitted electronically at the request of the
agencies.
The incomplete machine is only specified for installation in a garage door system, in order thereby
to create a complete machine according to the Machinery Guideline 2006/42/EG. The garage door
system may first be in operation when it corresponds to the above-mentioned guidelines. If in
doubt, a specialist company must be commissioned.
Esslingen, 29.02.2020
bau-shop-24 GmbH
Thomas Scharpf (CEO)
