3
The normal charging time of this product is 4-5 hours.
Put the battery into the inside of the terminal and connect the charger to
100V/220V AC power supply to charge the battery. Then the power indicator
on the upper right corner of the terminal screen will keep strolling as showed in
picture 3-1:
When the battery is fully charged, the power indicator will stop strolling; if the
battery is charged on switch-off mode, the following picture 3-2 indicates the
charging is finished:
picture 3-1 picture 3-2
Notes:
Please use the charger offered by the supplier. Dangers damages of the
product caused by usage of any unconfirmed charger will not be compensated
and repaired.
The battery should be charged in time when the terminal automatic shutdown
or being alarmed with low power.
The standby duration and call duration offered by the supplier is calculated in
perfect functional mode, in practice, working hours of the battery may vary due
to difference of internet service, functional mode and usage mode.
Disconnect the terminal and charger as soon as possible after the battery is
well charged.
III.. Operation Method of Basic Functions
1.Location Inquiry
In order to activate the GPS watch, you must first install the SIM card into
the watch. After the watch is turned on, you must first send a single
SMS message to the watch with number “1” entered into the message.
If you do not do this, the GPS functions will not work.
(1) SMS Inquiry
Create 988 + password command (defaulted password as 0000) via mobile
phone and send it to the terminal mobile phone number; after successful
sending, the guardian’s mobile phone will receive a piece of message which is
the Google website message.
In the same way, send command 666 plus password to the terminal, then the
terminal will return a piece of detailed latitude and longitude message.
(2) Platform Inquiry
Step 1: Log onto the platform (Please contact with the service provider to get
the platform address).