Operation
13
− To charge, connect the USB charging cable to a USB power adapter
(SELV, 5 V, max. 1 A - not included in delivery).
− Plug the USB power adapter into the power outlet.
− The LED will light up red while the product is charging.
− The charging time is about 3 - 4 hours.
− As soon as the battery is fully charged, the LED light switches off.
− Unplug the USB power adapter from the power outlet and disconnect
the USB charging cable.
Filling in water
WARNING!
Danger of electric shock!
− If the product tips over while the water container is full, the leaking water may run
into other pieces of electrical equipment and cause an electric shock.
− Empty the water container when the product will not be used for a longer period of
time.
− Make sure the product is not connected to the power supply via the USB cable before
filling in water.
1. Turn the control unit
1
clockwise and lift off from the water container
2
(see Fig. B).
2. Fill a maximum of 320 ml of water into the water container
2
. The transparent
panel
3
allows you to check the water level (see Fig. C).
3. Place the control unit
2
back onto the water container and turn counter-
clockwise (see Fig. C).
16_1058_IM_Rechargeable_Cool_Mist_Humidifier-PRINT-6.indd 13
09.09.21 11:14
