Operation
14
Switching the product on/off
The product has a color-changing LED with 7 colors, which can be selected via the
color changing button
5
.
1. Switch on the product with the power button
4
.
The water container
2
must be filled with water for the product to be switched
on. If the water container is empty, the LEDs will light up in red and the product
will switch itself off.
2. The product is switched on when mist is evaporated from the mist outlet
opening
13
and the LEDs light up and change colors.
3. Press the color changing button
5
to switch between the different colors.
4. Press the mist size button
6
to adjust the intensity of the mist (see Fig. A).
- You can select between high or low intensity of mist.
- Low intensity of mist is the default setting.
Filling up water
NOTICE!
When the sensor
10
is not in contact with water anymore,
the integrated safety mechanism will automatically stop the
evaporation process. The LEDs will light up in red and no mist will
be produced from the mist outlet
13
. The product will switch itself
off.
1. To start using the product again, disconnect from the power supply when
using with the USB charging cable. Then fill the water container
2
with water
(see section “Filling in water”).
2. Now, switch on the product (see section “Switching the product on/off”).
Stop humidifying
1. Press the power button
4
in order to switch on the product.
16_1058_IM_Rechargeable_Cool_Mist_Humidifier-PRINT-6.indd 14
09.09.21 11:14
