Operation
13
It is best to use the product with cool boiled or distilled water.
Change the water tank’s water on a regular basis to keep the product clean.
With a full tank, the product can operate continuously to 24 hours without having to
refill.
Setting up the product
− Connect the product to a socket with a power voltage corresponding to the rating
plate. Make sure that the connection socket
11
is freely accessible.
− Connect the hollow plug of the plug-in power supply unit
8
to the socket on the
back of the product.
Filling with water
WARNING!
Risk of electric shock!
If the product falls over with a full water tank, the outcoming water
can flow out onto other electrical devices and cause electric shock.
− Set the product down in a safe place.
− Empty the water tank if you do not intend to use the product
for an extended period.
− Make sure that the device is unplugged when you are adding
water to it.
1. Take off the lid
10
from water tank
5
.
2. Grab the water tank
5
by the carrying handle and remove it from the control unit
9
. Turn the water tank
5
upside down.
3. Unscrew the water tank cover
6
counterclockwise off the water tank
5
.
4. Use the water tank opening to pour max. 1 gallon (3 780 ml) of water into the
water tank
5
. Do not fill water in the mist outlet channel
7
.
5. Screw the water tank cover
6
back on clockwise and wipe off any water residue
with a dry cloth.
6. Turn the water tank
5
over again and place it on the control unit.
Summary of Contents for 1094S2022
