Cleaning
18
NOTICE!
Risk of damage!
Handling the product improperly may damage the product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like. They could damage
the surfaces.
− Never attempt to clean the product by immersing it in
water or any other fluids, and do not use a steam cleaner
to clean it. Otherwise, the product could be damaged.
− Do not in any case place the product in the dishwasher. It
would be destroyed as a result.
The water tank must be cleaned every three days. The control unit
must be cleaned once a week.
− Before cleaning, pull the power plug
7
out of the power outlet.
Cleaning exterior parts
− Use a slightly moistened cloth to wipe down the outside of the product.
Then let all parts dry completely before operating the product again.
Cleaning and descaling the water tank
− Unscrew the water tank cap
15
and remove any deposits or dirt particles
that have collected in the water tank. Wipe off limescale deposits with a
damp cloth and use a little vinegar to dissolve the limescale. Then rinse the
water tank’s cap and the water tank
2
with clear water.
Cleaning the control unit
− Use a damp cloth to wipe off limescale deposits inside and on the surface
of the control unit
4
. If necessary, use a little vinegar to dissolve the
limescale.
Cleaning the air vent
− Wipe the air vent
11
with a damp cloth. If necessary, use a little vinegar to
dissolve the limescale. Let the air vent dry completely.
