Safety
9
− Do not use the product if it is visibly damaged or if the
power cord or power plug is defective.
− If the product’s power cord is damaged, the cord must be
replaced by the manufacturer, its after-sales support, or a
person with similar qualifications to avoid risks.
− Do not open the housing; instead, have a qualified
professional carry out the repairs. Contact a qualified
workshop for this. Liability and warranty claims are
waived in the event of repairs performed by the user,
improper connection of the device or incorrect operation.
− Only parts that comply with the original device
information may be used for repairs. This product contains
electrical and mechanical parts which are essential for
providing protection against sources of danger.
− Do not operate the product with an external timer or
separate remote control system.
− Do not submerge the product, power cord, or power plug
in water or other liquids.
− Never touch the power plug with wet hands.
− Never pull the power plug out of the power outlet by the
power cord; instead, always do so by taking hold of the
power plug.
− Never use the power cord as a carrying handle.
− Keep the product, power plug, and power cord away from
open flames and hot surfaces.
− Lay the power cord out in such a way that it does not pose
a tripping hazard.
− Do not kink the power cord and do not lay it over sharp
edges.
− Only use the product in indoor areas. Do not use it in wet
rooms or in the rain.
− Never store the product so that it is at risk of falling into a
bathtub or washbasin.
− Never retrieve an electrical device by hand if it has fallen
into water. In this case, immediately pull the DC connector/
