Easy@Home GT-7910A, User Manual

13

0800 / 328 6020

GT-7910A / E46337

info@globaltronicssupport.com

AFTER SALES SUPPORT

GB
IRE

00800 / 4467 5888

Close the appliance cover. This reduces the noise level of the cleaning sound. Always 
connect the appliance to an approved power socket (220-240V~, 50Hz).
As soon as the appliance is connect to the socket, the red control lamp will illuminate on 
the operating panel.

Start of cleaning

Press the ON button to start cleaning; The blue container illumination lights up inside the 
device and goes out after completion of the cleaning process.

Timer

The appliance has an electronic 5-steps-timer. With this timer you can choose the length of 
the cleaning cycle.
Please press the SET button until the display shows the desired time. You can choose a 
cleaning cycle of 90 - 180 - 300 - 480 or 600 seconds.
The device switches o

ff

  the cleaning process automatically after the chosen time. You can 

however, manually cancel the process by pressing the OFF button.
Should the time be insu

ffi

  cient, simply start a new cleaning process by pressing the ON 

button again. However, wait at least 3 minutes before starting the next cleaning cycle, in 
order to avoid overloading the appliance.
During the cleaning cycle, use the window in the lid to control the cleaning process of 
sensitive objects, and cancel the process, if necessary.