USA
Using the manicure/pedicure set
AFTER SALES SUPPORT
16
USA
1-866-558-8096
service@801service.net
Fine sapphire disk and course sapphire disk
The fine sapphire disk
6
and the course sapphire disk
7
are suitable for:
• Filing and forming fingernails and toenails.
Notices for use:
− Place the sapphire disk perpendicular on the nails.
− Treat your nails with uniform pressure.
− Work in slow movements.
− Prevent heating through friction by not holding the sapphire disk too long
on an area.
Inserting the attachments
1. Be certain that the drive unit
1
is turned off and the operating/function
switch
5
is centered (see
fig. C).
2. Choose the desired attachment
6
,
7
,
8
,
9
,
10
,
11
or
12
(see chapter “Choosing the right attachment”).
3. Insert the attachment in the holder
17
. If necessary, turn it slightly until it
fits in the holder (see
fig. B). The attachment will audibly lock into place.
4. Check to make sure that the attachment is securely and properly in place.
Connecting the manicure/pedicure set
WARNING!
Risk of injury!
There is a risk of electric shock if you connect the manicure/
pedicure set to a line voltage other than that specified on the
nameplate of the power supply unit or if you use a different
type of power supply unit.
− Only use the power supply unit provided.
− Before use, check if the socket voltage corresponds with
the specifications on the nameplate.
− Check if the drive unit is turned off and the operating/
function switch is centered before you plug the power
supply unit into the socket.
You can only use the manicure/pedicure set when the drive unit
1
is con-
nected to a socket with the power supply unit
14
included with the pack con-
tents. For this, proceed as follows:
Summary of Contents for GT-MP-03-us
Page 4: ...A 4 USA 1 2 3 4 5 6 7 8 9 10 12 16 14 15 13 11 ...
Page 5: ...C 5 USA B 17 D 18 ...
Page 47: ......
