Operation
14
NOTICE!
Risk of damage!
The product can be quickly damaged when used with an
empty water tank.
− Never use the product without water in the water tank.
• It is best to use the product with cool boiled or distilled water.
• Change the water in the water tank on a regular basis to keep the
product clean.
• With a full tank, the product can operate continuously for
7 to 12 hours without having to refill.
Setting up the product
− Connect the product to a power outlet with a power voltage corresponding
to the rating plate.
Filling with water
WARNING!
Risk of electric shock!
If the product falls over with a full water tank, the outcoming
water can flow out onto other electrical devices and cause
electric shock.
− Set the product down in a safe place.
− Empty the water tank if you do not intend to use the
product for an extended period.
− Make sure that the device is unplugged when you are
adding water to it.
1. Grab the water tank
2
by the carrying handle
13
and remove it from the
control unit
4
. Place the water tank upside down.
2. Turn the water tank cap
15
counterclockwise to take it off (see
Fig. E
).
3. Use the water tank opening
16
to pour max. 0.74 gallon (2,800 ml) of water
into the water tank (see
Fig. F
). You can read the water level through the
provided water level window
3
.
4. Turn the water tank cap clockwise to put it back on and dry off any remaining
water with a dry cloth (see
Fig. F
).
