Operating instructions
18
6. Press the foot pedal
29
(or set the power OFF/speed switch to “L” if you're
using batteries) to start winding.
7. Stop winding after the desired amount of thread is wound onto the
bobbin.
8. Push the bobbin winder pin and bobbin back to the right.
9. Remove the bobbin from the bobbin winder pin and then cut the thread.
Threading the sewing machine
1. Set the power OFF/speed
switch
6
to the “OFF”
position.
L OFF H
2. Raise the presser foot lifter
17
and turn the handwheel
3
counterclockwise until
the needle is in its highest
position.
3. Place a thread spool
25
onto
the spool pin
14
, making sure
that the thread rolls off the
spool in a counterclockwise
direction.
When needed, use the thread
spool pin foot
27
and/or
thread spool cap
26
.
4. Hook the thread through
the thread guide
16
and then securely slip it
counterclockwise under the
thread guide disk
15
.
