Operation
17
Operation
Charging the product
• The product contains rechargeable batteries which need
to be fully charged for at least 8 hours
before the product is
used for the fi rst time.
• The product cannot be used during charging and must be
switched off during the charging process.
• Always charge the product when there is a noticeable
decrease in suction power.
1. Make sure the handheld vacuum
12
is placed in the holder
2
of the floor
vacuum
1
.
To do so, first insert the suction opening
18
of the handheld vacuum into
the lower part of the holder and then push the handheld vacuum towards
the back of the holder until it locks into place (see steps 1 and 2 in
Fig. D
).
The charging contacts (
5
and
14
) on the holder and handheld vacuum
can only be in full contact for charging when the handheld vacuum is
inserted correctly.
2. Place the floor vacuum (with the handheld vacuum) onto the charging
station
27
(see step 3 in
Fig. D
).
Make sure the floor vacuum is upright and the bracket
28
of the charging
station is fully inserted into the slot
7
on the backside of the floor vacuum
(see
Fig. A
and
B
).
The charging contacts (
6
and
29
) on the floor vacuum and charging
station can only be in full contact for charging when the floor vacuum is
inserted correctly.
3. Connect the power adapter
24
to a wall outlet to start charging.
The indicator light in the on/off button
13
of the handheld vacuum will
glow red during charging and will turn blue as soon as the product is fully
charged.
4. Once fully charged, remove the power adapter from the wall outlet.
