AFTER SALES SUPPORT
USA
Use
13
USA
1-800-886-8506
hup-service@h-u-p.com
NOTICE!
Please keep in mind that in many countries you will
need an additional socket adapter.
Unfolding and using the hair dryer
1. Use a coin or screwdriver to set the voltage selector switch
4
to the
available voltage range (220 – 240 V~ or 110 – 120 V~) (see fig.
A
).
2. Fold the handle
3
all the way down.
3. Make sure that the 3-step switch
6
is set to the
0
setting.
The hair dryer is switched off.
4. Connect the hair dryer to the power supply.
5. Check the FI safety switch by pushing the “TEST” button
10
. The power
supply must be immediately interrupted. If the power supply is interrupted,
push the “TEST” button again and follow the further instructions. If the pow-
er supply has not been interrupted, do not use the hair dryer and contact
the manufacturer at the service address provided on the warranty card.
6. If desired, attach the styling nozzle
8
to the hair dryer’s air outlet
9
.
7. Push the 3-step switch to the desired fan setting.
8. If desired, push the cold air button
7
and hold it down (see
fig. A
).
9. Once you are done using the device, push the 3-step switch to the fan
setting
0
. The hair dryer has now been switched off.
10. Pull the power plug out of the socket.
11. Let the hair dryer cool off completely.
You can now store the hair dryer as described in the chapter “Cleaning and
storage”.
Using the styling nozzle
A styling nozzle is included in the product contents of this hair dryer. The styling
nozzle is used to control the direction of airflow. The styling nozzle is ideal for
fast drying and systematically styling your hair.
1. Make sure that the handle
3
is folded down and the hair dryer has been
switched off (see
fig.
A
).
2. Attach the styling nozzle
8
to the air outlet
9
. Make sure that it audibly
locks into place.
push the “TEST” button again and follow the further instructions. If the pow
push the “TEST” button again and follow the further instructions. If the pow
er supply has not been interrupted, do not use the hair dryer and contact
er supply has not been interrupted, do not use the hair dryer and contact
the manufacturer at the service address provided on the warranty card.
the manufacturer at the service address provided on the warranty card.
f desired, attach the styling nozzle
f desired, attach the styling nozzle
8
to the hair dryer’s air outlet
ush the 3-step switch to the desired fan setting.
ush the 3-step switch to the desired fan setting.
f desired, push the cold air button
f desired, push the cold air button
nce you are done using the device, push the 3-step switch to the fan
nce you are done using the device, push the 3-step switch to the fan
The hair dryer has now been switched off.
The hair dryer has now been switched off.
ull the power plug out of the socket.
ull the power plug out of the socket.
et the hair dryer cool off completely.
et the hair dryer cool off completely.
You can now store the hair dryer as described in the chapter “Cleaning and
You can now store the hair dryer as described in the chapter “Cleaning and
heck the FI safety switch by pushing the “TEST” button
heck the FI safety switch by pushing the “TEST” button
supply must be immediately interrupted. If the power supply is interrupted,
supply must be immediately interrupted. If the power supply is interrupted,
push the “TEST” button again and follow the further instructions. If the pow
push the “TEST” button again and follow the further instructions. If the pow
er supply has not been interrupted, do not use the hair dryer and contact
er supply has not been interrupted, do not use the hair dryer and contact
the manufacturer at the service address provided on the warranty card.
the manufacturer at the service address provided on the warranty card.
to the hair dryer’s air outlet
to the hair dryer’s air outlet
ush the 3-step switch to the desired fan setting.
ush the 3-step switch to the desired fan setting.
and hold it down
and hold it down
nce you are done using the device, push the 3-step switch to the fan
nce you are done using the device, push the 3-step switch to the fan
The hair dryer has now been switched off.
The hair dryer has now been switched off.
ull the power plug out of the socket.
ull the power plug out of the socket.
et the hair dryer cool off completely.
et the hair dryer cool off completely.
You can now store the hair dryer as described in the chapter “Cleaning and
You can now store the hair dryer as described in the chapter “Cleaning and
Using the styling nozzle
Using the styling nozzle
Summary of Contents for RHT 2014
