.
.
17
16
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
customercare@winplus.com.au
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
customercare@winplus.com.au
1300 663 907
AUS
Cleaning and Storage
Before cleaning the Steam Station Iron, ensure the unit is turned OFF and unplugged from
the power point. If recently used, allow time for the iron to cool down completely. This
may take up to 2 hours.
Clean the base, iron and soleplate by wiping with a moist cloth.
When storing the Steam Station Iron, ensure the following steps are taken.
1.
Turn OFF the appliance and unplug from the power point.
2.
Empty the water tank.
3.
Allow the iron to cool completely
before storing. Wrap the cord and
steam hose around the base to
store neatly
Disposal
At the end of its working life, do not
throw this product out with your
household rubbish. Electrical and
electronic products contain substances
that can have a detrimental effect on
the environment and human health if
disposed of inappropriately. Observe any local regulations regarding the disposal of
electrical consumer goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.
Please keep the original packaging carton and materials in a safe place. It will help to
prevent any damage if the product needs to be transported in the future. In the event it is
to be disposed of, please recycle all packaging material where possible.
If you require another copy of this instruction manual, please contact
customercare@winplus.com.au
to obtain an electronic copy.
WARNING:
DO NOT immerse the main unit or iron in water or any other liquid.
NOTE:
Do not use abrasive cleaning materials or chemicals as this can damage the
appliance and soleplate.
Cleaning and Maintenance
Descaling the Steam Station Iron
When the descale indicator is illuminated, the boiler needs to be flushed out to maintain
optimum performance of the appliance. Before proceeding, ensure you have unplugged
the appliance from the power point and removed the water tank.
Descaling or decalcifying solutions can be readily purchased to perform cleaning. If using
these solutions, follow manufacturer instructions carefully as any misuse may cause
damage to the appliance. Always ensure the solution is specifically designed for the
purpose of descaling irons or Steam Station Irons.
How to Clean
1.
Turn OFF unit and unplug from power point. Allow unit to cool completely.
2.
Position the unit on a sink edge or similar waterproof surface.
3. Tilt the unit on its side to expose the base.
NOTE:
For convenience it is recommended to detach the water tank and iron.
WARNING:
Do not use any other solutions in the water tank as this may cause damage
to the appliance.
WARNING:
If Steam Station Iron has been recently used, ensure the appliance has
cooled completely before proceeding with descaling process to reduce risk of burns.
Needle Plate
Screw Driver
Boiler Seal
Summary of Contents for STS2406
Page 15: ...LAUNDRY...