.
.
11
10
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
customercare@winplus.com.au
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
customercare@winplus.com.au
1300 663 907
AUS
The Steam Station Iron is designed to be used with normal, room temperature tap
water only. In hard water areas it is recommended to use distilled water as minerals
or other elements may cause wear to the appliance and staining to clothes.
Remove any packaging material and promotional labels before using your Steam
Station Iron for the first time. You may notice an odour from the unit on first use.
This is normal and will cease after a short while.
Before First Use
Water Use
The Steam Station Iron has a locking mechanism for the iron which keeps the iron
safely in place and allows easy transport. To release, press the iron release button
and rotate the iron clockwise off the iron rest.
Iron Locking Mechanism
Getting Started
WARNING:
Do not use the following in the water tank: rain water, bottled water,
detergents, descaling agents or any other chemicals.
WARNING:
Take care of the hot soleplate when releasing the iron, this poses risk of burns.
NOTE:
Before releasing the iron, ensure the base is on a flat, stable surface.
If the water is low, the low water level indicator light will illuminate. At this point the
iron can generate little to no steam. To refill the tank during use, detach the water
tank (the unit will beep) and refill with water. Slide the tank back into position and
wait for the boiler to reheat.
The Steam Station Iron has a safety auto-off function which turns the unit off
automatically after 10 minutes of non-use. If you need to turn the unit back on,
simply press the ON/OFF button and follow instructions as per page 13.
Your Steam Station Iron is equipped with boil dry protection, meaning if there is
no water in the water tank or no water running through the boiler, the unit will beep
and the heating element for the boiler will shut off. Please note however that this
does not affect the iron soleplate and therefore it will still be hot.
The Steam Station Iron has a descale notification function to assist in notifying
when the boiler should be flushed. Mineral deposits can build up in the appliance
potentially blocking steam holes and affecting overall performance. When the
descale indicator light illuminates it means the boiler should be cleaned. Follow
cleaning instructions listed on page 17.
Water Level
Auto-Off Function
Boil Dry Protection
Descale Indicator
WARNING:
Do not fill the water tank above the MAX line.
Summary of Contents for STS2406
Page 15: ...LAUNDRY...