.
.
13
12
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
customercare@winplus.com.au
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
customercare@winplus.com.au
1300 663 907
AUS
Lift the lid and fill the tank with
water under a tap or using a jug,
ensuring you do not exceed the
MAX fill line.
Remove the water tank by
pressing the button on the handle
and pulling the tank out.
NOTE: Water should be at room temperature. Dry any excess water from around the
outside of the water tank.
2.
1.
Slide the tank back into position.
Gently pull the handle to ensure
the tank is correctly in place.
3.
Position the Steam Station Iron on a firm level table, bench or ironing board.
Filling the Water Tank
Instructions
Press the ON/OFF button, the unit
will beep once.
Plug the unit into a household
power point and turn power point
ON.
The ON/OFF light will illuminate
and the (steam setting 1) icon will
begin flashing as default, indicating
the boiler is heating. The iron
thermostat light will also turn ON.
Select the desired steam setting
by pressing either the right or left
arrows. The corresponding light
will flash to indicate the boiler is
heating to the selected setting.
NOTE:
The unit may make a pumping noise for a few seconds, this is normal.
2.
1.
3.
4.
Steam Station Iron Operation
Summary of Contents for STS2406
Page 15: ...LAUNDRY...