File name:Easybike Dolpine user Manual , rev 32
10
|
P a g e
EASYBIKE GOLAN 62, NIRIT , ISRAEL WWW.EASYBIKE.CO.IL
Charger
Operation Manual & Safety
Wuxi Sansui Electronics Co., Ltd.
Operation Manual of Lithium-ion Battery Charger
Model:
SSLC084V42
I. Features
This product is a smart charger. With adoption of switching mode power
Supply technology, the charger is special for lithium-ion, with outstanding
Performance. It has the following advantages:
1. Wide range of voltage input: 100~240 Vic;
2. Low noise of output ripple;
3. Automatic recovery from short circuit and over-current protection;
4. Anti-backflow;
5. Complete sealed structure, with characteristics of damp-proof,
Dust-proof and high safety level.
II. Scope of application
This charger is applicable to 36V/8-15Ah lithium-ion battery set. The charging
voltage is 43.8±0.4V.
III. Method of application:
1. Plug in the battery box first and then plug in the AC power supply;
2. When the battery is charged normally, the power supply charging indicator is
red. After the battery has been fully charged, the indicator
Turns green;
3. After the battery has been fully charged (the indicator is green), please
Unplug AC power supply first and then unplug the battery box to stop charging.
IV. Trouble-shooting
1. The power supply indicator is not on:
a. Check whether there is AC input
b. Check whether there is a poor contact at the input wire interface
For any other case, please send the product to the factory for repair. Don‟t
repair it by yourself.
2. The charging indicator is not on:
a. Check whether the output connector is well connected
b. Check whether the battery is damaged
For any other case, please send the product to the factory for repair. Don‟t
repair it by yourself.
3. The charging indicator keeps red all the time:
a. Check whether the battery is damaged. For any other case, please send the
product to the factory for repair. Don‟t repair it by yourself.
