background image

File name:Easybike Dolpine user Manual , rev 32

 

 

|

 

P a g e

   

 

EASYBIKE GOLAN 62, NIRIT , ISRAEL   WWW.EASYBIKE.CO.IL

                     

 

 

Battery and charger  

 

Lithium Battery  

Your bike equipped with Lithium LifePO4, known as safety to use, long life and 
hardworking ability for discharge.   
Before your first ride, the battery needs charging. Bring it to a wall socket. 
(220V - 230V AC EU other countries or 115V AC US) 
Insert charging plug into socket on battery and connect charger power cord to 
A/C outlet. Turn on A/C outlet. 
It‟s important that to follow this sequence of actions every time you Charge the 
battery. 
Do not remove the plug by pulling the cord; always grip the charging port by its 
metal body. 
Check the indicator lights on the top of the charger. 
 
RED light indicates that the charger is connected and 
Running from an A/C outlet. 
GREEN light indicates that the battery is fully charged. 
 
It will take a maximum of 3- 4 hours to fully charge your battery. You may 
interrupt the charging at any time. 
As Lithium batteries do not suffer from memory effect, it is not required for the 
battery to be empty to commence a recharge. 
Top-up charging every time you‟ve completed your cycle ride is recommended. 
Kept in good condition battery will perform at least 1200 full 
Charge cycles, with a retention of 70% from its original capacity. 
Please use only the Charger as provided by easybike. 
 
A new battery might take 2 – 3 charges before it performs at its stated capacity. 
 
Sometimes after temporary disconnection, the charging status light may give a 
false green reading. To verify that your battery is fully charged, switch the 
charger off, wait for the charger lights to go out and switch it back on again. The 
charging status light should quickly return from amber to green, when the 
battery is fully charged. 
The battery may be also charged on the bicycle, do make sure that the bicycle is 
switched off so as to not waste electricity. 
If the battery refuses to accept a charge, refer your easybike dealer for more 
information. 
Battery charging is automatically regulated; there is no danger of overcharging. 
We advised that you disconnect the battery and switch the charger off when the 
charging process is completed. Do not charge the battery in wet conditions. 
Never allow children to play with the battery or charger. Do not leave your 
battery in a fully discharge state for long periods of time. The battery will 
continue to self-discharge, resulting in damage. 
 

Summary of Contents for Dolphin light























Reviews: