11.Anti-hijacking
The alarm default is turn on anti-hijacking function with Switch 4 on control module is press down.
Once anti-hijacking function is turn on, when the vehicle is running, user get off the vehicle then close the
door well and take the remote control away. The alarm will try to detect remote control signal after 30
seconds, if still unable to detect the remote signal in 1 minute, the alarm will alarm with siren beeps and turn
signal flashes and car engine will cut off automatically in 40 seconds.
If user turn off anti-hijacking function, when the vehicle is running and remote control (key fob) was taken
away, the alarm will be automatically set to arm status once the vehicle is stop and open then close car door.
After that, the vehicle will be unable to start except the alarm detect the remote control nearby. User can input
password to get in the vehicle and start the vehicle.
12.Alarm trigger by illegal door opening
When the vehicle is in arm status, if the vehicle door is opened illegally, it will trigger the alarm and siren will
sound and turn signal light flashes rapidly.
14.Touch password entry
LED1 Red color
LED2 Blue color
13.Central door locking automation
Close the door well, starting the vehicle, step on the foot pedal, the central door will automatically lock the
vehicle door after 15 seconds. Once the vehicle is stopped & engine turn off, the central door will
automatically unlock.
When vehicle engine is running and there is passenger get off the vehicle, then close the door well, step on
foot brake pedal and start the vehicle, the central door will automatically lock the vehicle door after 15
seconds.
When the vehicle is running, press unlock button once will unlock the central door system.
Turn off central door locking automation:
When the vehicle is started, open car doors, quick step on foot
brake 5 times in 5 seconds, siren beeps twice will turn off the central door locking automation function.
Turn on central door locking automation:
When the vehicle is started, open car doors, quick step on foot
brake 5 times in 5 seconds, siren beeps once will turn on the central door locking automation function.
The alarm default setting is turn on central door locking automation function
Action/Status
Armed/locked
Disarmed/unlocked
When input password
to unlock (Input C0#+
6 digital number)
When input password
to lock (Input C0#+6
digital number)
When finish input
right password
When finish input
wrong password
LED1(red color)
Turn off
Turn off
Blinks once to confirm
if the input is valid
Not blink if the input
is invalid
Blinks once to confirm
if the input is valid
Not blink if the input
is invalid
Turn off
Turn off
LED2(blue color)
Blinks slowly
Turn off
Keep lighting on
Keep lighting on
Blinks 3 times to
confirm then turn off
Turn off directly
Engine start/stop
button color
Turn off
Turn on( blue/red)
Turn off
Turn on( blue/red)
Color changed,
turn on/off
Not change, turn on/off
The alarm is equipped with touch password keypad, which is mount inside of the front windshield and user
can input password outside the vehicle to lock or unlock car door.
If you do not want to use the touch password entry function, you can choose not to install the touch password
keypad. We recommend you to install it for backup usage.
When the vehicle is armed, user can disarm the system and unlock the vehicle door with the remote control
or input the password preset to disarm and unlock the vehicle door. However, if the remote control is low
battery or malfunction or lost, then user can use the touch password entry function to unlock and lock the
vehicle.
Factory default password is 123456.
a.Use touch password to unlock the vehicle:
1.Input C0#+6 digital number password (factory default setting password is 123456) in turn. Every time you
input, the red LED1 on the password key pad will blink once to indicate that the input is valid, if the red LED1
not blink, please re-input again.
2.Once you finish input C0#, the blue LED2 will illuminate continuous, then you can input the 6-digital number
password (from 0 to 9) one by one. Every time you input, the red LED1 will blink once to confirm the input is
valid.
3.If password is correct, once you finish the input, the blue LED2 will blink 3 times, then turn off, the door will
be automatically unlocked and user can get in the vehicle and drive your car away.
4.If the password is not correct, the blue LED2 will turn off directly and you need to try once more time again.
5.If you input wrong number, please press C button once to cancel.
6.If you continue to input wrong password for 5 times, the password entry function will be locked for 1 hour.
And please try again after 1 hour. If user approach the vehicle with remote control when PKE function is turn
on, the system will automatically unlock the vehicle door.
Color changes with different operation on the password keypad
7
8
9
0
C
1
2
3
LED1
LED2
4
5
6
-38-
©
EASYGUARD
Electronics
.
All
right reserved.
-37-
©
EASYGUARD
Electronics
.
All
right reserved.