King Size Moist/Dry Heating Pad
Instructions For Use
AFTER SALES SUPPORT
service@801service.net
3
1 866 558 8096
How To Use Your Heating Pad
1. Stretch the cloth cover over a flat surface with the printed side facing up. Insert the vinyl pad
inside the cover, making sure that the control and cord are outside the cover. Close the cover with
the snap button. WARNING: Never use this heating pad without the cloth cover.
2. Plug the heating pad into an electrical outlet.
3. To turn on the heating pad, press the multifunction button. Your heating pad WILL NOT come
on until you press the button. NOTE: If the heating pad still does not work, try plugging it into
another electrical outlet. Make sure the electrical cord is not broken.
4. Let the pad preheat for a few minutes. Your heating pad has been designed to work with the
maximum heating according to the UL standards.
5. To select the desired temperature setting, press the button to select either, WARM, LOW,
MEDIUM, or HIGH. The heating pad will turn off after cycling through the heat settings.
6. The heating pad will automatically turn off after 40 minutes.
Use of The Moist Heat Therapy
1. Remove the sponge from the heating pad. Place the sponge under warm running water until it is
fully saturated. Gently wring out the excess water.
2. Place the sponge on top of the pad and cover both with the cloth cover. Close the cover with the
snap button.
WARNING: Do not immerse the vinyl heating pad in water or place it under running water. This can
cause severe damage.
Care Instructions
Remove cloth cover from the heating pad. To keep the cover fresh and clean, hand wash it with mild
soap in lukewarm water and drip dry to keep it fluffy. DO NOT MACHINE WASH OR DRY.
It is to be expected that the cover of the heating pad unit may eventually become discolored.
