Peer to Peer v2.1
8
Peer to Peer configuration
The architecture of the EasyIO F Peer to Peer kit is deployed as shown below in Step 2. The P2P service object can
be dropped anywhere in the Sedona app tree. Our recommendation is to create a separate folder and identify as
you require.
Service
Object
Step 1
Connect to the controller with CPT Tool.
Default login credentials are as below;
IP Address
: 192.168.10.11 (FG+ Series) , 192.168.10.12 (FS Series) , 192.168.10.30 (FW Series)
Username
: admin
Password
:<no password>
Add the controller type P2P kit to the controller by navigating to manage kits and install
easyioFGP2P
OR
easyioFWP2P
into your controller.
Image below shown is the kit for FG+ series and FS Series
Image below shown is the kit for FW series.
Step 2
Choose
easyioFGP2P (easyioFWP2P)
from Sedona Palette
Drag & drop the
P2PService
into your
App.
The object can be dropped in the EasyIO folder or a new folder can be
created for the P2P service.
In the example below, the object is dropped into a new folder named “P2P”.
**Note**
Once the P2P service is in the Sedona apps and enabled, the controller is considered part of the global registers
network.
