EasyIO FT Series – User Reference v1.0
14
Login Details
EasyIO FW Series default IP address and login details are as below.
FT AP SSID (FT-xxxxxx)
Default IP address
: 192.168.4.1
Default Subnet
: 255.255.255.0
Sedona Login via CPT
Username
: admin
Password
: <no password>
Web Browser login
No login require at the moment.
Establish a connection for the first time
In this chapter we will guide you to connect the FT Series controller for the first time.
A brand new FT controller Wi-Fi Access Point is always enable.
It has DHCP server enable.
The best approach to connect to a brand new FT series controller is by utilizing its DHCP server and run
automatic IP address in your device.
This reduces the hassle of manually configuring your computer IP address and other network settings as
well as reducing error.
Step 1
From your computer wireless network shortcut locate the controller SSID (default main SSID is FT-xxxxxx)
and connect.
Enter password as
12345678
when prompt.
Step 2
Once your computer is connected it will be most likely IP address 192.168.4.2 assign automatically by
the FT controller.
You should be able to ping the controller via command line.
FT default IP address is 192.168.4.1 in AP mode.
