EasyIO FT Series – User Reference v1.0
6
Prerequisites
1.
HTML5 supported Web browser.
2.
Latest CPT Tool 29
th
Dec 2018 or later.
3.
The EasyIO FT Series Sedona Controller running latest firmware.
Contact EasyIO support at
support@easyio.com
if you need assistance.
Introduction
EasyIO FT Series is the most smallest wireless Sedona controller in the market. It is equipped with a all in
one microprocessor with built in Wi-Fi, the first in the Automation industry, with a 240MHz processor and
also with a lightweight
freeRTOS V8.2.0
OS for premium performance. Supports BACnet IP server over Wi-
Fi and TCom or premium performance with Niagara AX and N4.
The Build in boot loader can be carried out remotely. No more manual service button
needed is used.
Firmware upgrading can be done remotely and without any assistant.
Firmware upgrading is via web browser. No extra program or software required.
This document describe about basic connection and technical specifications.
FT Series range of products comes in few options.
Options are referring to IO (Input/Output) configurations.
FW
Model
UI
AO
DO
EIA-485
Protocol Supported
FT-04B
2
1
(Voltage only)
1
1
Sedona
BACnet IP server
Table shown above show the IO configuration
