Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
Installing/removing SIM card
The SIM card is usually stored in a card and you need to take it
out carefully before installing.
• Turn off the mobile phone; remove battery and external
power supply.
• Insert the SIM card into the slot or pull out the SIM card from
the slot.
Note: Please turn off the mobile phone and remove battery
before removing SIM card.
Switching on/off
Press and hold the Hang_Up key to switch on/off the mobile
phone.
If you switch on the mobile phone before inserting the SIM
card, it prompts you to insert the SIM card. The mobile phone
checks whether the SIM card is valid automatically after it is
inserted.
The following prompts appear on the screen in sequence when
the mobile phone is just switching on:
• Input phone password – If the password of the phone has
been set.
• Input PIN – If the password of the SIM card has been set.
• Searching – The mobile phone is searching for available
network.
The function of the double SIM card – For the sake of making
your usage convenient, this cellular phone takes a pair of SIM
cards functions. You have to insert a valid SIM card inside the
two SIM card slots before this function can be used. Turn on
your phone and then it will enter the function of dual SIM cards
automatically.
Connecting to network
• The mobile phone will search for network automatically after
the SIM card is decrypted successfully (display “Searching
for network” on the screen). The name of network operator
will appear in the standby state of the phone once connected.
Note: If there is prompt of “EMERGENCY” on the screen,
it means that you are out of the normal coverage area
(service area) of the network, but you can still make an
emergency call according to the signal intensity.
Making a phone call
When the operator symbol of the network appears on the
screen, you can make or answer calls. The symbol in the
top left corner of the screen shows the signal strength of the
network.
If the signal strength is low, try moving around with the phone
until the signal becomes stronger.
Making local telephone calls
Input the telephone number using the number keys, then press
the Dial key to start calling. If you need change a number,
please press Right soft key to delete the number(s). The
screen will show a moving picture when you are dialing the
number. You should then hear the connecting sound. If there is
a problem connecting you may need network support.
After your conversation is over please press the Hang_Up
key to end the call.
Area number Telephone number Dial key
Dialling a fixed telephone extension
Some fixed telephone extensions can’t dial directly. You
need to dial switchboard first, then dial extension number.
If you insert the letter “P”, the sign for pausing between the
switchboard number and the extension number when you
input telephone number, this machine will complete the full
number for you and connect to the extension automatically.
The method of inputting “P” is pressing the * key (the screen
will show the letter “P” at this time).
The area number Switchboard number P Extension
