PANTONE 072 C
PANTONE 123 C
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Digital Automatic Air Compressor.
Take the guesswork out of inflating your tyres with this high-power digital tyre
compressor. It automatically inflates and then stops when the correct pressure
is reached. Simply pre-set the required pressure with the digital touch control,
connect to your car cigarette socket, and then connect the hose to your tyre
valve. Its high-speed pump inflates all types of tyres in half the time of many
standard mini-compressors. With a long-reach 12ft power cord it’s complete with
adaptors for inflating airbeds and footballs. Easy to store, it measures a compact
L22xW14xD7.5cm.
BEFORE USE
The air compressor is a multifunction compressor designed for cars, motorcycles,
bicycles, rafts, air mattresses, and sports balls.
Read the instructions carefully before use and retain for future reference.
Power required: 12volts, 10 amps DC. (NB – the cigarette lighter/power source must
have a fuse of 15A or more). The compressor is designed for occasional use only.
Operation over an extended period of time will overheat the unit and damage the compressor. Do
not use continuously for more than 10 minutes at a time. If the unit becomes hot or sluggish, stop
immediately and allow to cool for at least 30 minutes.
A 12v battery charger may be used to power the item but it must be rated at least 15 amps or more to
avoid damage. Not for use on high pressure items such as lorry or tractor tyres.
OPERATION
1. Select an adaptor if necessary for your article.
2. Check the articles user manual for the correct pressure to inflate to.
3. Place the hose end valve onto the valve of your item ensuring a good
connection is made. Close the thumb latch.
4. Plug the power cord into the cigarette lighter or power source of your car.
Turn on your car.
Compression will not start to work
if your required pressure is lower
than the pressure in your tyre
equipment
Unit switch for 4 types: PSI/BAR/KPA/Kg/cm
2
Press “-” to lower your required pressure
Press “+” to increase your required pressure
PARTS DESCRIPTION
Item # Name
1.
12 Volt Plug
2.
Valve/Tyre Chuck
3.
Compressor Power Switch
4.
Pressure Gauge
5.
Mattress Adaptor
6.
Ball Adaptor
O : OFF
II : ON
OPERATION (continued)
5. Press the unit button (the left hand button – this may be marked M) to choose the measuring unit
required: press once for PSI, twice for BAR, three times for KPA and four times for Kg.cm2.
6. The LCD display will show the current pressure reading of your article.
7. Press the +/- buttons to set the required pressure.
8. Press the on switch of the compressor.
9. The compressor will then activate.
10. When the required pressure is reached, the compressor will continue for a few seconds and then
stop. Press the off switch and unplug the unit.
Important information:
The Digital Automatic Air Compressor will vibrate vigorously in use.
This is intentional and no cause for concern. The vibration will not damage either the product
itself or your tyres.
Caution:
Compressor will not start to work if your required setting pressure is lower than in your tyre
equipment.
If the compressor has been set successfully the display will be not flashing anymore.
Any activities during flashing the compressor will not work.
Start unit on high pressure initially may damage the unit. For high pressure requires higher
current to start the motor.
Any short-circuit of product may damage the unit.
To inflate sport equipment:
Ball:
1. Insert the Ball Adaptor (6) into the valve/tyre chuck (2) and push down the valve lock lever (2) to
secure connection.
2. Press adaptor’s needle (6) into ball carefully.
3. Follow compressor operation steps.
Bicycle Tyre:
1. Connect valve/tyre chuck (2) to bicycle tyre air valve and push down the valve lock lever (2) to
secure connection.
2. Follow compressor operation steps.
Mattress/Raft:
1. Insert the Mattress Adaptor (5) into the valve/tyre chuck (2) and push down the valve lock lever (2)
to secure connection.
2. Press adaptor’s needle (6) into mattress/raft carefully.
3. Follow compressor operation steps.
TROUBLE SHOOTING
Compressor does not start or blows fuses
• Push the power plug firmly into the power source and twist round to ensure a good connection.
• Check all parts for dirt and clean where necessary.
• Check vehicle lighter fuse. This should be 15amps minimum.
Compressor runs but does not inflate
• Check all connections are clean and secure.
• Check hose for damage or leaks.
Compressor runs slowly
• Overheated from excessive use – switch off and allow to cool.
• Power source too low.
Automatically
inflates to
the desired
pressure
Paper weight 60gsm
1
3
4
5
7
6
2
