EN
18
Mains Power Mode
PLEASE NOTE!
■
Only plug the mains adapter into a plug socket once the cable has been connected
to the device.
■
Do not supply power to the device via a computer because the high currents that may
exist could damage the computer.
For mains power mode, the items supplied with the device include a cable (USB connec-
tor to barrel connector).
A USB mains adapter is also required.
1. Plug the barrel connector of the cable which is supplied into the
IN DC 6V
socket (
18
)
on the device.
2. Plug the USB connector of the cable into the USB mains adapter.
3. Connect the USB mains adapter to an easily accessible plug socket whose voltage
corresponds to the speci
fi
cation on the rating plate of the USB mains adapter. The
plug socket must also be readily accessible after connection.
The device can alternatively be operated with a standard mains adapter (6 V DC,
max. 1 A) and a cable with a barrel connector (
) (not supplied with the
device). This is plugged into the
IN DC 6V
socket (
18
) of the device.
Use
The device can be used as a
• conventional
radio;
• playback device for SD cards and storage media with a USB connector;
• speaker for external players (e.g. MP3 players) which are connected via Bluetooth
®
or a jack plug.
The device also has a socket for headphones.
Radio
1. To obtain the best possible radio reception, extend the telescopic aerial (
12
).
2. Switch on the device by pressing the
POWER
button (
10
).
3. Keep pressing the
FUNC
button (
7
) until the
RADIO
operating lamp (
13
) lights up.
The FM radio reception (VHF) is switched on.
4. To switch to AM reception (long, medium and short waves), press the
FUNC
button
again.
5. Select a radio station by turning the
TUNING
dial (
14
). Tilt and rotate the telescopic
aerial to improve the reception if necessary.
6. Adjust the volume with the
VOLUME
control (
16
).
