19
EN
Playback via Bluetooth
®
NOTICE:
Read the operating instructions for the Bluetooth
®
-enabled device.
1. Switch on the device by pressing the
POWER
button (
10
).
2. Keep pressing the
FUNC
button (
7
) until the
BT
operating lamp (
20
) lights up. The
radio can now be found by the Bluetooth
®
-enabled device.
3. Switch on Bluetooth
®
on the Bluetooth
®
-enabled device and start searching for avail-
able devices.
4. Select “Design Radio” and connect. As soon as both devices are connected to one
another, the
BT
operating lamp is lit constantly.
5. The playback can be controlled both via the Bluetooth
®
-enabled device and via the
PREV
(
5
),
NEXT
(
6
),
PLAY
(
9
) buttons and the volume control (
16
) of the radio.
USB
1. Make sure that the device is switched off. Press the
POWER
button (
10
) to switch
off the device.
2. Plug the USB connector of a storage medium into the
USB
socket (
4
).
3. Switch on the device by pressing the
POWER
button.
4. Keep pressing the
FUNC
button (
7
) until the
USB/SD/AUX
operating lamp (
21
) lights
up blue.
5. Control the playback via the
PREV
(
5
),
NEXT
(
6
),
STOP (8),
PLAY
(
9
) buttons and
the volume control (
16
).
6. Switch off the device before the USB connector is pulled out.
SD Card
1. Make sure that the device is switched off. Press the
POWER
button (
10
) to switch
off the device.
2. Insert an SD card into the
SD CARD
slot (
3
).
3. Switch on the device by pressing the
POWER
button.
4. Keep pressing the
FUNC
button (
7
) until the
USB/SD/AUX
operating lamp (
21
) lights
up red.
5. Control the playback via the
PREV
(
5
),
NEXT
(
6
),
STOP (8),
PLAY
(
9
) buttons and
the volume control (
16
).
6. Switch off the device before the SD card is pulled out.
