Use a stronger stimulation level. Please note that in very cold weather, you
may need to use a slightly higher setting to achieve the same level of
intensity.
Problem No. 2: The collar receiver cannot be matched up with the transmitter.
Please make sure the collar receiver is switched on. When the collar receiver
is in OFF mode, a red LED light will come up when the power button is
pressed and held down, the collar receiver will not do the matching up
successfully when it is OFF.
Please make sure the power button on the collar receiver is held down firmly
during the whole course of matching-up, so that the green indicator light on
the collar receiver will come up and stay on, and later on start flashing on and
off (not just flickering) once it has received the command signal sent from the
transmitter handset.
Problem No. 3: The system doesn’t have range, or the range has been significantly
reduced.
Either you or the dog is shielded by a metal structure. Metal fences, chain link dog
enclosures, screen doors, buildings, and other metal structures can affect the radio
signal. Operate the Remote Trainer away from these structures.
You’re experiencing temporary radio interference. Radio signals from nearby CBs
and walkie talkies can reduce range. Wait a short while then try again, or move to
another area.
Important:
As this product is a wireless transmitting apparatus, you must NOT
use the remote control system in places like petrol stations or hospitals where
mobile phones are prohibited. For patients using heart pacemakers, please consult
your doctor before using this device.
