EasyPro Pond Products Limited Warranty
EasyPro Pond Products (“EasyPro”) warrants to the purchaser that this product ("Product") will be free from any mechanical or material defects for a
period of:
LED6WP Housing: three years from the date of purchase.
LED Bulb: two years from the date of purchase.
EPT45 Transformer (included): three years from the date of purchase.
LED6WP fixtures must be installed on a magnetic 12v AC low voltage system. For use in fresh water only. This warranty only covers properly installed
and maintained Products sold by authorized EasyPro Sellers who are subject to and follow EasyPro’s quality control standards. Please note that
because EasyPro is unable to control the quality of Products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not
cover Products purchased from unauthorized sellers.
This warranty does not cover normal wear and tear, nor any deterioration suffered through overloading, improper use, negligence, improper installation,
acts of God or accident. Similarly, any modification made by the purchaser to the Product will cause the warranty to be null and void. This warranty does
not cover any cost associated with the installation or removal of the Product subject to a warranty claim.
All returned items will be inspected to determine cause of failure before a warranty claim is approved.
The exclusive remedies provided hereunder shall, upon EasyPro’s inspection and option, be either repair or replacement of the Product or parts covered
under this warranty.
Making a Claim:
A Return Authorization (“RA”) number must first be obtained by calling EasyPro at 800-448-3873 or via email at warranty@easypro.com.
It is the purchaser’s responsibility to pay the return shipping charges. Be sure to include the RA number, original receipt (in the form of an invoice or sales
receipt), your name, your return address and your phone number inside of the package. No warranty claims will be honored without the original receipt that
shows that your purchase was made from an Authorized EasyPro Seller. Ensure the product is properly packaged and insured for the replacement value.
Damage due to improper packaging is the responsibility of the sender.
ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEAREBY LIMITED IN
DURATION TO THE DURATION OF THE WARRANTY AS DESCRIBED ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you.
EasyPro shall not be held liable for any damages caused by defective components or materials of this Product; or for loss incurred because of the interruption of
service; or any consequential/incidental damages and expenses arising from the production, sale, use or misuse of this Product. Some States do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
EasyPro shall not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect of this Product. This warranty gives you specific
legal rights, and you may also have other rights that vary from State to State.
800-448-3873 • Grant, Michigan
www.EasyPro.com
6416 • 10/19
Installing the Transformer:
1
This product may be installed indoor or outdoor. Avoid placement in areas of direct water contact. DO NOT
SUBMERSE THIS DEVICE IN WATER.
2
Place transformer where built-in photo eye is not blocked. Select from four settings on back of device for Auto,
dusk to dawn, or on at dusk and off after 4, 6, or 8 hours .
3
Use correct voltage in accordance with the nameplate information. Maximum output of 45 watts; do not over load
transformer.
4
Secure the unit using the integrated screw mount slot.
Installation for LED Lights:
1
Disconnect power before installing the lights.
2
Connect the light fixture to its base by unthreading the nut at the base of the light. Slide the “C” shaped bracket
onto the back of the light and tighten nut. Some applications may not require base.
3
Place the light in the desired location of your water feature or landscape.
4
Adjust the angle of the light by the bolt on the base.
5
Ballast the base with rock or other suitable item to keep light fixture in place.
6
Run the cable back to the transformer. Connect leads to transformer.
7
LED6WP uses 6 watts, size transformer appropriately.
8
Plug in transformer and enjoy.
