background image

10.   When storing the pump for an extended period of time, wash it and store indoors in a bucket of 

water.  

11.   Always use a check valve on the pumps.
12.   Do not attempt to disassemble pump during the warranty period. If there are any questions 

please contact you local dealer.

Service & Maintenance

1.   Disconnect all power supplies before service.
2.   The pump should be removed from the pond on a regular basis, cleaned and checked over for 

damage to prolong the life of the pump.

3.   Clean the impeller and intake screen when the flow is visibly reduced.
4.   Clean the pump and impeller with clean fresh water.
5.   Check inside the impeller housing for large debris or algae, which could reduce the flow.
6.   Clean the impeller housing with a damp cloth. Clean the outside of the impeller with a damp 

cloth and clean water.  

7.   Check and tighten nuts and bolts if required.

Specifications

Model 

HP 

Volts 

Amps 

Weight

TH150 

1/4 

115 

2.9 

15 lbs.

TH1502 

1/4 

230 

1.5 

15 lbs.

TH250 

1/3 

115 

4.0 

15 lbs.

TH2502 

1/3 

230 

2.0 

15 lbs.

TH400 

1/2 

115 

5.6 

20 lbs.

TH4002 

1/2 

230 

2.8 

20 lbs.

TH750 

115 

9.5 

27 lbs.

TH7502 

230 

4.8 

27 lbs.

Pump Performance Chart

Summary of Contents for TH Series

Page 1: ...ys connect to a Ground Fault Circuit GFCI 5 Never let the pump run without water as this will dam age the impeller over heat the pumps and possibly burn out the pump 6 Do not use this product in bathrooms or swimming pools 7 Do not let the water level in your water feature fall below the top of the pump body 8 All electrical work must be performed by a qualified technician Always follow the Nation...

Page 2: ... of the pump 3 Clean the impeller and intake screen when the flow is visibly reduced 4 Clean the pump and impeller with clean fresh water 5 Check inside the impeller housing for large debris or algae which could reduce the flow 6 Clean the impeller housing with a damp cloth Clean the outside of the impeller with a damp cloth and clean water 7 Check and tighten nuts and bolts if required Specificat...

Page 3: ...H400i TH750i Handle TH4 TH4 TH4 TH4 Rubber Feet THRF THRF THRF THRF Mechanical Seal Set THMECSEAL THMECSEAL THMECSEAL THMECSEAL Cord THCORD THCORD THCORD THCORD2 Bearing Set top bottom THBS1 THBS1 THBS2 THBS2 Bottom Seal THBS THBS THBS THBS Offset Flange THF THF THF THF Replacement Parts for TH Pumps ...

Page 4: ...s and expenses arising from the produc tion sale use or misuse of this product The manufacturer or supplier shall not be held liable for any loss of fish plants or any other livestock as a result of any failure or defect of this product If you experience a failure of your pump please check the following before returning to us 1 Remove filter housing clean and inspect impellar and surrounding chamb...

Reviews: