ERP12R/S &
ERP16R/S
6
Mounting the RAID System
Installing the Slide Rail
The RAID system/Rail Extenders can be installed in a standard 19-inch rack. Follow the procedures below:
1. Adjust the 4 screws making sure that correspond
with the mounting points on the rails.
2. Adjust the length of the rails as needed.
3. Secure the rails using two nuts and bolts on both
the front and back posts of the rack.
4. Tighten the lock screws. (If necessary, install the
extenders to move RAID system out a little.)
5. Slide the RAID system into the rack and secure it
into place using the fixing screws.
